BD 305110 Needle 26 Gauge 3/8 Inch PrecisionGlide Strl Tan Shlf Pk 1000/CS

As demand for our products continues to rise, our inventory levels are changing rapidly on a daily basis. If you need your order shipped immediately, please contact us as soon as possible so we can ensure that your order is fulfilled in a timely manner.
Phone: 850-708-4904


BD 305110 Needle 26 Gauge 3/8 Inch PrecisionGlide Strl Tan Shlf Pk 1000/CS

305110 – 26 G BD Needle 3/8 in. Single use, Sterile

BD HYPODERMIC NEEDLE is sharp, tri-beveled stainless steel needles are with non-coring design. Unique grinding and polishing process enhances the sharpness for ease of penetration. The needles feature universal fit, triple sharpened, sterile and are color coded hubs for easy identification.

  • PrecisionGlide stainless-steel needles with translucent, color-coded, polypropylene hubs.
  • Can also be sterilized with ethylene oxide (EtO) in their individual, easy-to-peel blister package.
  • Intradermal bevel.

Key Product Features

Hub Color Tan
Hub Material Polypropylene
Hub Type Luer
Needle Gauge 26 G
Needle Gauge (m) 0.45 mm
Needle Length (in.) 3/8 in.
Needle Length (m) 9.53 mm
Needle Tip Type Intradermal
Needle Type Hypodermic
Needle Wall Type Regular
Total Shelf Life 1825
Sterile Sterilized product
Type Of Bevel Regular
Sterilization Method Radiation
BPA Free Not made with BPA
DEHP Free Not made with DEHP
Latex Statement Not made with natural rubber latex
Disposable Disposable product
Single Use Product is for single use only

Types of Needle Walls and Bevels

The Thin Wall needle is thinner than a Regular Wall needle. The inner diameter is bigger without any increase in the outside diameter. For example, a 21 G Thin Wall needle has the same outside diameter as a 21 G Regular Wall, but has the same inner diameter as a 20 G needle. Thin Wall allows the same flow volume as a Regular Wall needle one gauge larger.

305110 Regular Wall

This is the most common wall thickness. The thickness of the steel wall allows a good flow rate, and minimizes flexing when the needle is inserted into a vial stopper or patient.


305110 Intradermal Bevel

The geometry of the tip is designed to allow for shallow and low angle insertion of the needle just below the epidermis. The fluid volume is typically very small and slowly administered. This unique needle bevel is used primarily for skin testing (e.g., allergy tests).

Stainless Steel Needle

Made of stainless steel, which is siliconized to allow easier penetration, thus minimizing patient discomfort. Available in different lengths and gauges to suit individual clinical and patient needs.


BD Conventional Needle & Syringe Color Chart

Device Characteristics

What MRI safety information does the labeling contain? Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437) No
Device labeled as “Not made with natural rubber latex” No
For Single-Use Yes
Prescription Use (Rx) Yes
Over the Counter (OTC) No
Kit No
Combination Product No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P) No

Product Packaging Information

Packaging Level Shelfpack Each Case
Quantity 100 1 1000
Length 116.0 mm 451.0 mm
Width 90 mm 181.0 mm
Height 82 mm 129.0 mm
Weight 173.7 g 1.737 g 1.737 kg